Flood Light 60-200 watt
- Model most suitable for Flood Lights for industrial use.
- Extremely reliable as there is NOTHING TO FAIL inside.
- Continuous operation even at system voltage of 270v.
- Inherent capability of driver to sustain surge of 4 KV No effect of surge – NO SPD required anywhere in the system.
- Operates reliably even if the earthing is poor. Earthing conductor not required – Operates without earth connection.
- Operates reliably even under swinging neutral condition.
- LEDs operated at nominal current specified by manufacturer.
- Current regulation as per IS 16104 clause 7.2 User high Efficacy LED -> 140 lm/W and Lenses of premium quality.
| Warranty | 2 Years / 5 Years |
| Input Supply | 140-270 VAC, 47-53 Hz, 440 VAC for 30Sec |
| Power factor | > 0.95 |
| THD | < 10% |
| Surge protection | Up to 4 KV, No additional SPD required |
| LED Used | OSRAM |
| LED Luminous Efficiency | 140 lm/W at Ti=85 Deg C |
| Beam Angle | 120 ° |
| Lens Used | Suitable for Type I or II and III Roads |
| Lens Material | PMMA |
| System Efficinecy | > 85 lm/W |
| LED Operating Current | Well Within limits specified by LED Manufacturer |
| Estimated LED Life | > 50000 Hrs |
| CRI | > 70 |
| CCT | 5000-5700 K |
| Degree Of Protection | IP 67 |
| Operating Temperature | -10 to 50 ℃ |
| Humidity | Up to 95% RH Non Condensing |